Search


  




Special Conveyor Designs

Custom Control Panels

Installation & Commissioning Assistance

Wear-Resistant In-Feed and Discharge Chutes

EconoLoader™ - Drag Conveyor


Drag ConveyorOPTIONAL FEATURES:
  • Stainless steel frame and drag chain construction
  • Drag conveyor sizes > 24 inches
  • Loader reach radii > 27 feet
  • Vertical position control of the 2nd conveyor arm
  • Special infeed and discharge transitions
  • Post, haunch or platform mounting
  • Special control functions, interfaces and enclosure ratings
  • Retractable loading spouts with 3 to 60 feet of vertical travel and dust recovery


DYNATEK’s drag conveyor-based EconoLoader™ is preferred for the toughest  materials and loading applications. Carbon steel box and structural truss frames,  AR-grade steel bottoms and side plates and UHMW flights mounted on heavy duty steel chain results in loaders that are strong, yet versatile enough to handle everything from DDGS to abrasives like fly ash, fertilizer & cement. Drag conveyor-based loaders are also self-cleaning and fully enclosed so conveying is dust-free.

Like all DYNATEK loading systems, drag conveyor-based models are designed for articulated motion. Two slewing gear-based pivots enable both conveyor arms to pivot separately resulting in nearly 330 degrees of rotation and a loader reach of up to 27 feet. Loading is fast and convenient because you position the loader, not the truck, railcar or barge being loaded.


CLICK HERE
Download Product Data Sheet


 
CORE SPECIFICATIONS

 

 Construction: Main and second conveyor arms = Carbon steel structural truss frames with AR-grade bottoms and side plates; UHMW flights and heavy duty steel chain
 Loader Reach: 22 ft. from inlet CL to discharge CL for truck loading; 27 ft. from inlet CL to discharge CL for railcar and barge loading
 Loading Rate: 12", 18" and 24" wide conveyors can load at rates up to 26,400 cu. Ft. / hr.
 Arm Positioning: Hydraulic or electromechanically-driven slewing bearings rotate each arm upt to 330 degrees horizontally at 1/2 RPM to provide articulated motion.
 Control: Fully wired NEMA 4 control panel with hand-held control pendant allows a single operator to rotate arms 1 and 2, raise/lower the loading spout and start/stop conveyor operation
 Finish: White metal sand blast with gray epoxy primer and polyurethane final coat